🎯 Goal
See what the Land Rover Defender Puma dashboard expects and receives.
🧰 Hardware
- 1× CANable (second unit ideally)
- The Puma dashboard
- 12V power supply
💻 Software
- SavvyCAN
🔌 How to Connect
CANable Puma Dash
-------- ----------
CAN High → CAN High
CAN Low → CAN Low
GND → Ground
👉 Plus:
- Power the dash (12V + ignition feed)
⚠️ Critical Detail: Termination
If the dash is on its own (bench setup):
You MUST add:
- 120Ω resistor between CAN High and CAN Low
Otherwise:
- No communication / unstable bus
✅ What You Should See
If nothing else is connected:
- Likely very little or no traffic
That’s normal.
Later, when translator is working:
- You’ll see your injected messages